Spiderglass - Spider Glazing

For monolithic glass, SPIDERGLASS consists of an articulated bolt-fixing which is secured to a support structure to ensure that the glazing is firmly fixed in position. Use of such bolts permits movement in all directions. Each fitting is carefully fitted into a countersunk hole and is secured flush into the exterior surface of the glass.

Laminated glass, in the form of STADIP SPIDERGLASS (combined with heat-strengthened glass) can also be used with SPIDERGLASS fixings and ensures the integrity of the glass in the event of accidental breakage.

Double glazed SPIDERGLASS incorporates a SECURIPOINT (specially toughened) outer leaf with either a toughened or laminated inner. The units can incorporate any of the COOL-LITE or PLANITHERM products.

Most glass products from the SAINT-GOBAIN GLASS range can be used with SPIDERGLASS:

• PLANICLEAR clear float glass or DIAMANT extra-clear glass
•  PARSOL body-tinted glass
• COOL-LITE CLASSIC, COOL-LITE ST or COOL-LITE K or SK*, ANTELIO solar control glass
• PLANITHERM low-emissivity glass
• EMALIT EVOLUTION* enamelled glass
• SERALIT EVOLUTION* screen-printed glass.

It is possible to use  BIOCLEAN self-cleaning glass depending on the type of sealants used.

* If these products are used, thy are subject to specific requirements.

The spectrophotometric performance of SPIDERGLASS corresponds to that of the glazing which constitutes the system.

• Facades
• Inclined facades
• Double-skin facades
• Overhead glazing
• Interior partitions / atria
• Canopies

Unobtrusive, flush appearance

SPIDERGLASS fixings contribute to the creation of all-glass assemblies and innovative projects. With SPIDERGLASS, the glass is not set in frames like traditional constructions, but held in place by point-fixings, thus creating innovative aesthetic all-glass facades.

Maximum transparency

All-glass structures can be created, ensuring interiors are generously provided with natural light. When refurbishing older buildings, the clarity of the glass allows the original structure to be exposed in its true form.

Installation & Fixing

SPIDERGLASS is a complete system for bolted glass structures. The complete package includes the glass, fixings, fasteners and SPIDER brackets for connection to the framework or structure.

Design principles:

The size of the supporting structure must be adequate to take the weight of the glass and the wind load conditions so it does not put any strain on the glass itself.

The glass needs to withstand the wind loads and imposed dead loads.

There must be a gap between the two panes of glass to avoid transmitting stresses and to allow space for the mastic weather seal.

Various types of support structures are possible.

Seal: Panes must be sealed using a silicone mastic applied to an extruded silicone seal. (e.g. HYDROSTOP seal developed by SAINT-GOBAIN GLASS).